ADVERTISEMENT

## HE###A steel section

These are the properties of the HE###A section (also known as HEA-### or IPBl-###). HE-A profiles are European, wide-flange, double-tees with parallel flanges.

Steel: | (*) | |

Design Code: | (*) |

Dimensions | |||

h = | |||

b = | |||

t _{w} = | |||

t _{f} = | |||

r = | |||

Dimensions according to EURONORM 53-62 | |||

Weight | |||

Weight: |

Geometrical properties | |||

Area: | |||

Perimeter: | |||

Surface area | |||

Also known as "painting area" | |||

...per length: | |||

...per weight: |

ADVERTISEMENT |

Detailing | |||

d = | |||

h _{i} = | |||

c = | |||

e = |

Section class | |||

Steel: | |||

Code: | |||

Bending (y-y): | |||

Bending (z-z): | |||

Compression: | |||

Section components: | |||

Flanges: | |||

Web (bending): | |||

Web (compression): |

Bending properties (major axis) | |||

I _{y} = | |||

W _{el,y} = | |||

W _{ep,y} = | |||

W _{pl,y} = | |||

i _{y} = |

Bending Properties (minor axis) | |||

I _{z} = | |||

W _{el,z} = | |||

W _{ep,z} = | |||

W _{pl,z} = | |||

i _{z} = |

Shear Properties | ||||

Code: | ||||

A _{vz} = | ||||

A _{vy} = |

Torsion/Warping Properties | |||

I _{t} = | |||

I _{w} = |

Strength : load parallel to web | ||||

Steel: | ||||

Code: | ||||

Moment: | ||||

Shear: | ||||

M _{el} = | ||||

M _{pl} = |

Strength : load parallel to flanges | ||||

Steel: | ||||

Code: | ||||

Moment: | ||||

Shear: | ||||

M _{el} = | ||||

M _{pl} = |

## Formulas

#### Table of contents

### Geometrical properties

HE-A sections are European, wide-flange, double-tee profiles with parallel flange edges. Their dimensions are standardized in EURONORM 53-62, using the following five properties:

- the height of the section
- the width of the flanges
- the web thickness
- the flange thickness
- the fillet radius

These definitions are shown in the following figure.

Other geometrical properties can be derived from the five basic dimensions. For instance, the following properties provide some measurements of the section that can be useful for detailing purposes:

- the clear distance between flanges
- the straight segment of the web
- the length from the flange edge to the web
- the straight segment of the flange (one half of it)

These are illustrated in the following figure:

The section area and the perimeter of any HE-A section can be formulated as:

**Area:****Perimeter:**

### Weight

The weight of any beam with a section that doesn't change along its length (aka prismatic beam) is determined by the section area and the density of the material. Considering carbon steel, which has a density equal to 7850 kg/m^{3} (or equivalently 0.2836 lbf/in^{3}), the weight per length of a HEA beam, with section area , is found as:

- (the result in kg/m)

or:

- (the result in kg/m)

or:

- (the result in lbf/in)

### Mechanical properties

#### Loading parallel to web

Mechanical properties related to the transverse loading of a beam are necessarily defined around an axis of bending. This in term, depends on the direction of loading. Loading parallel to the web results in bending around axis y, also called major axis. Accordingly, all mechanical properties related to bending around y, are marked with index y. Such a case is illustrated in the following drawing.

#### Loading parallel to flanges

Loading parallel to the flanges results in bending around axis z, also called minor axis. Accordingly, all mechanical properties related to bending around z, are marked with index z. Such a case is illustrated in the following drawing.

##### Moment of inertia

The moment of inertia (second moment or area) is used in beam theory to describe the rigidity of a beam against flexure. For a HEA section, it can be calculated with the following formulas, for loading parallel to web (i.e. bending around y) or parallel to flanges (i.e. bending around z), respectively:

##### Radius of gyration

The radius of gyration is property that describes how far from the axis the area of the section is distributed. It is given by the following two formulas, for the major axis (y) and minor axis (z), respectively:

##### Section modulus

The section modulus of a section is typically used for the calculation of its strength in bending, assuming linear elastic conditions (for this reason also called elastic section modulus). It is directly related to the moment of inertia. For a symmetric section around the axis of bending - (HEA is symmetric around both major and minor axis), it can be calculated with the next two formulas, for loading parallel to web (i.e. bending around y) or parallel to flanges (i.e. bending around z), respectively:

##### Plastic section modulus

The plastic modulus of a section is typically used for the calculation of its strength in bending, assuming fully plastic conditions. For a HEA section, it can be calculated with the following formulas, the first one for loading parallel to web (i.e. bending around y) and the second for loading parallel to flanges (i.e. bending around z), respectively:

##### Shear area

The shear area of a section is typically used for the calculation its strength against shear. For loading parallel to the web, shear area is roughly the area of the web (different approximations are given in building codes):

- , according to Eurocode 3 (2005, 2022). Conservatively, can be 1.
- , according to ANSI/AISC 360-16 (2016):

For loading parallel to the flanges, shear area is the combined area of the two flanges:

#### Torsional loading

HEA sections are open sections and under torsional moments they develop both St Venant torsion and warping.

##### Torsion constant

The torsion constant is related to the rigidity of the section under St. Venant torsion. Closed formed solutions are not available however, and its calculation is typically performed either through numerical methods or using empirical expressions. Here, the formula in Kraus & Kindmann (2009) is adopted:

where:

##### Warping constant

The warping constant for HEA sections is calculated by the formula:

### References

Euronorm 53-62 (1962), Breedflensbalken met parallele flenzen; Publications Office of the European Union.

AISC (2016), Specification for structural steel buildings ANSI/AISC 360-16; American Institute of Steel Construction: Chicago, USA

Eurocode 3, EN1993-1, (2005), Design of steel structures - Part 1-1: General Rules and Rules for Buildings; CEN, Brussels, Belgium.

Eurocode 3, EN1993-1, (2022), Design of steel structures - Part 1-1: General Rules and Rules for Buildings; CEN, Brussels, Belgium.

Kraus, M., & Kindmann, R. (2009). St. Venants Torsion Constant of Hot Rolled Steel Profiles and Position of the Shear Centre. In *Proceedings of 11th Nordic Steel Construction Conference (NSCC), Malmö, Sweden* (pp. 454-461).